vefpot.blogg.se - St connector dimensions

It is adopted in the same coupling way and pin as FC connector. SC is abbreviated for Square Connector owing to its square shape, and has a 2.5mm ceramic ferrule for providing accurate alignment. First invented by Nippon Telegraph and Telephone (NTT) in 1980s. SC connector is a snap-in connector used for high performance transmission. LC connector is available for the push-pull function which is convenient for installation and uninstallation and is favored for single-mode. It is considered to be the replacement for SC connector due to a 50% smaller size of a 1.25mm ferrule.The shape of connector is the same as SC connector but also smaller. It is a small form-factor fiber optic connector designed to provide horizontal light waves vary from 1280nm to 1624nm. LC connector stands for lucent connector. LC connector is a widely used fiber optic connector to joint equipment and optic fiber together. There are two structures of MPO plug, one is the female plug with guide hole, and another is male plug with guide pin. MPO product is available with 8, 12, 24 and 48 connectors which allows the operator to change channels simply by repatching the fanned-out side of the cable. The difference between MPO connector and other types of connectors is its larger size of multiple connectors on one end and a single connector on the other end. It is designed for high-density light transmission in high-speed bandwidth and data network. MPO connector is a Multi-fiber Push-On/Off connector used for the joint between devices and optic fiber. Generally, one system will use the same type of connectors.

Different kinds of connectors are varied in different connector size or connecting ways. There are many types of connectors, such as SC connector, LC connector, FC connector, ST connector, and MTP/MPO connector. The connector allows light pass through optic fiber. FC fiber optic pigtail is usually used for general fiber optic applications.įiber optic connector is the terminal end of an optic fiber, it is easier and faster for people to joint different devices with connector instead of splicing which needs other tools for connection.

The connector features the screw type structure and high precision ceramic ferrule. But it is still used for many fiber optic applications, especially for multimode fiber optic communications.Ĥ)FC fiber optic pigtail uses the FC connector developed by Nippon Electric Company. It is one of the eldest generations of fiber optic connectors. ST connector has a 2.5mm bayonet-styled ferrule. Its light weight and cost-effective features enable different applications of SC fiber optic pigtail.ģ)ST fiber optic pigtail uses the ST connector developed by American Telephone & Telegraph. SC connector has a ceramic ferrule of 2.5 mm. A 1.25mm ceramic ferrule makes LC fiber optic pigtail a better choice for low cost but high precision signal transmission.Ģ) SC fiber optic pigtail uses the SC connector developed by Nippon Telegraph and Telephone.

LC connector is now one of the most popular connectors in the world.

Step 8, mission complete! Give it a try on your equipment.ġ)LC fiber optic pigtail uses the LC connector developed by Lucent Company.

Put it on the polishing film, and lightly polish the connector for 8 to 10 times.

Step 7, place the connector in the polishing disk.

Step 6, gently insert the fiber into the connector and put the connector components together.

Step 5, fill the syringe with adhesive, and slowly inject the adhesive into the ceramic tip.

Step 4, use a lint-free, alcohol-soaked tissue to clean the fiber.

Strip the buffer in several small lengths to avoid fiber damage.

Step 3, measure and mark the buffer to the desired length(usually remain 16 mm).

Step 2, measure and mark kevlar to the desired length(usually remain 7 mm).

Place jacket stripper on mark and squeeze gently until cutter closes.

Step 1, measure and mark the cable jacket to the desired length(usually 35 mm).

When everything is ready, we can begin the fiber optic termination.